Wednesday, February 1, 2012

Turnigy Brushless ESC Programing

Hello all,
Recently I purchased a nice Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller that was reported to be programmable through your transmitter throttle stick movements.  Well, it is programmable, but I could never get any correct documentation for this one.  It also listed this Turnigy TYP1 ESC programmer as an optional item.  In my infinite wisdom, I did not buy the programmer with the speed controller.  I finally gave in and purchased it and now wish I had from the beginning.  It's small, light, and really easy to use, and really inexpensive.
 Here are all the pieces that are needed to get the programming done. I have here a LyPo battery pack for power, along with the brushless speed controller and programmer.  The first thing is to hook up the brushless speed controller to the programmer.  The programmer has two connections noted as BATT for battery and BEC.  Since this brushless speed controller has a BEC it can be connected to the BEC input and no battery is needed on the battery connection.

Once the battery is connected to the speed controller, it lights up with the current program.

To change any of the settings, use the up and down scroll button to select the feature to be changed.

Now use the left and right scroll key to select the setting for the feature that is desired to be changed.

Once you have all the settings the way you want them, use the OK button to save the settings to the speed controller.  When you do this the light above the OK key will flash blue and then turn off when done.

I really like this programmer and it certainly is small enough to take anywhere.

I added this video of me programming my ESC.

Thanks for stopping by my blog.  Please feel free to post comments, good or bad, and be sure to come back and check for future posts.